Aluminium/Aluminum Foil Household 8011-O for Food Storage

• Customization: Available
• Usage: Air Condition, Food Use, Kitchen Use, Pharmaceutical, Label & Tag
• Type: Roll
• Model NO.: 8011-O
• Temper: Soft
• Treatment: Plain/Bare
• Thickness: Double Zero Foil
• Surface State: Single Light Aluminum Foil
• Rolling Characteristics: Finish Rolling
• Material: Aluminium
• Inner Diameter: 76mm/152mm
• Standard: Gbt 3198-2010, JIS H 4160-1994, DIN_En_546-2
• Transport Package: Packaged in Wooden Cases
• Specification: Thickness: 0008-0.02mm Width: 200-1450mm
• Trademark: N/A
• Origin: China
• HS Code: 760711
• Production Capacity: 10, 000 Mt Per Month

Product Description

1. SCOPE

This Technical Data Sheet is applied to 8011 alloy soft temper 10 - 25 microns plain foil.

1. SPECIFICATION

2.1  Alloy, Temper and Dimension
      

2.2  Chemical Composition

CHEMICAL COMPOSITION (%)
Limits of Alloy Elements										AL
Alloy	Fe	Si	Cu	Mg	Zn	Mn	Ti	Other
								Ind.	Total
A8011	≤0.65		≤0.05	≤0.05	≤0.10	≤0.05	≤0.06	≤0.03		≥99.35

2.3  Properties

<2.4 Dimensional Tolerances
Thickness Tolerance: within + 4%
Width Tolerance        : + 1.0 mm
Roll Core:  Steel core with ID 76.2mm and 152.4mm and protrusion of 1-10mm at both ends.
2.5  Surface Condition
One side matt and the other bright, or both sides bright. Surface free from defects that are detrimental to the application such as corrosion, broken matt, indent, loose edge, dent mark, stains, line marks, scratches, holes, etc.
2.6   Other Conditions
Edge: No telescopic, oscillation, slanting and collapse marks.
Joints: For roll OD≥200-450mm, allowing 0-1 joints of each roll with ultrasonic welding;
 For roll OD>450-650mm, allowing 0-2 joints of each roll with ultrasonic welding;
For roll OD>650mm, allowing 0-3 joints of each roll with ultrasonic welding;
The length between joints is more than 1000 meters.
Unwind: Coil is free from stickiness and can be unwound freely to the core.

3  TEST METHOD
 

Quality Topic	Inspection method	Test frequency
Chemical composition	Spectral analysis of the barren producer	Each casting block
Strength	Tensile test DIN EN 546-2, §3	Random sampling
Gauge	Mechanical Gravimetric (Schieds methode)	Each coil
Width & O. D.	Measuring tape	Each coil
Numbers of Splices	visual	Each coil
Windings	visual, measuring tape	Each coil
Flatness & Surface	visual	Each coil
Pores, Rolling holes	DIN EN 546-4, § 5, light table	Random sampling

4  PACKAGING AND LABELLING
4.1  Packing Method
Each roll shall be suspended at both sides of the wooden box.  Rolls shall be wrapped with EPE as first layer coupled with silicon gel desiccant in both sides of roll to protect from corrosion, PE film as 2^nd layer and then another layer of PE film for enhancing protection.
4.2    Label Identification
With information of: Manufacturer, Goods Description, S/C NO., Lot No. Alloy & Temper, Dimension, Packing Date, or according to the clients' requirements.